Imagine harnessing the power of the sun in our fight against infectious disease. In a way, we've already done this with Ultraviolet light, or UV-C light technology.
UV disinfection has been around for decades in hospitals and other medical facilities to help prevent the spread of airborne infectious disease. More recently, UV lamps, also known as germicidal lamps, have been used in HVAC systems to help disinfect the passing air and restore efficiency by cleaning the internal parts.
UV-C light, also known as the ultraviolet germicidal wavelength (UVGI) is one of four types of UV produced by the sun:
Due to its short wavelength and high frequency, UV-C germicidal light has proven highly effective at disinfection. Although it doesn't naturally pass through the atmosphere, it can be artificially created in the form of a UV lamp.
UV-C light is easily absorbed by biological materials. It breaks through cell walls and radiates deep to interrupt the DNA and RNA. Once UV-C breaks the DNA strands, the cell either dies or is unable to replicate. If a microbe survives germicidal light, it's because it has an exceptional ability to repair itself (like certain cysts), or it wasn't exposed to the light long enough.
Always wear skin and eye protection when working around germicidal light.
If improperly handled, UV-C radiation can cause skin and eye damage. Recent research has found that a narrow band of UV-C (207-222 nm) can inactivate (render harmless) microbes without harming human skin, which is a promising discovery for the future of the technology.
Similar tests have shown UV-C to be effective at killing Measles, Smallpox, MRSA and other drug-resistant super bacteria. Although tests have not been done on all microorganisms, experts believe that UV-C light can effectively destroy most at the right intensity levels, lamp placement, and exposure times. For example, ASHRAE lists UV-C as one of only three ways of controlling airborne infection, the others being filtration and ventilation.
For homes, businesses, and critical facilities, HVAC-mounted UV-C lamps are increasingly being recognized for their effectiveness in reducing microbial buildup on cooling coils and in disinfecting passing air.
Mold, bacteria, and other types of microbes thrive in the cool, moist area inside a cooling system. Over time, these microbes accumulate and reduce system efficiency. Essentially, the coil cannot effectively cool when it's smothered in microbes, so the fan works harder to maintain the desired temperature. All this leads to discomfort, maintenance problems, and shorter system lifespan.
At the same time, your HVAC system and ducts could transport viruses and bacteria around the house. Imagine your spouse is sick in one room. They cough, and it releases germs that get sucked into the return air duct. If they're small enough to bypass your furnace filter, they can travel anywhere you have an open supply duct. Not to mention, the mold growing on your cooling coil can release spores into the airstream and aggravate allergy or asthma sufferers.
Installing a UV germicidal lamp inside your HVAC system can accomplish the following:
Many UV owners forget to replace their germicidal lamp bulb. After roughly one year, UV-C output begins to diminish and becomes less effective at disinfection. This is true even if you still see the lamp glowing. Make sure to replace the bulb annually to maintain performance.
Use the sun's power to help keep your building healthy and clean. For best results, get a professional heating and cooling contractor or electrician to install the UV-C lamp in your ductwork. He or she will know the right place to install it for maximum performance.
Always use your UV lamp in conjunction with a furnace filter to maximize indoor air quality and breathe easier. If you have any questions about UV disinfection, please contact our product experts at 866-631-6389.